Casey logo

New Arrivals

Specials

CASEY EQUIPMENT CORPORATION
275 KAPPA DRIVE
PITTSBURGH, PA 15238
PHONE: (412) 963-1111
 

Equipment   >   MECHANICAL   >   BLOOMING/ROUGHING MILLS

BLOOMING/ROUGHING MILLS   (2)

BLOOMING/ROUGHING MILLS

Blooming and reversing roughing mills are very similar in design. The major difference between them is the incoming product. Blooming mills are used to reduce the cross sectional area of a cast ingot into a bloom or billet. Blooming mills are typically 2-high reversing design with 30” to 50” diameter work rolls. Reversing roughing mills are a similar design and start with a cast or rolled billet and are used to reduce the cross sectional area of the workpiece prior to entering a finishing mill. The work rolls of roughing mills range from 16” to 36” in diameter. In either case, the rolls are driven in one direction as the ingot, bloom or billet is passed between the rolls which reduce the height of the workpiece. After the workpiece clears the mill. The rolls are stopped and their direction of rotation reversed. In many cases while the roll direction is reversing the workpiece is rotated 90 degrees using manipulators prior to re-entering the works rolls for further reduction. The end product from both blooming mills and reversing roughing mills is a billet that is smaller and longer than the starting product. Contact Casey Equipment for a quote on used blooming/roughing mills for sale.

 
WORK ROLL DIAMETER (") MANUFACTURER OF EQUIPMENT TAG # TITLE
Sort up Sort down Sort up Sort down Sort up Sort down  
  " SCHLOEMANN 200784-000-00 SCHLOEMANN 80 TPH 7 STAND 2-HI BLOOM AND BILLET MILL 
37 " SMS 200521-000-00 37" X 84" SMS TWO HIGH REVERSING BLOOMING/ROUGHING MILL 

Copyright © 2020 Casey Equipment Corporation