Casey logo

New Arrivals

Specials

CASEY EQUIPMENT CORPORATION
275 KAPPA DRIVE
PITTSBURGH, PA 15238
PHONE: (412) 963-1111
 

Equipment   >   ELECTRICAL   >   BRAKE WHEELS - CRANE BRAKE WHEELS

BRAKE WHEELS - CRANE BRAKE WHEELS   (94)

BRAKE WHEELS - CRANE BRAKE WHEELS

Brake wheels, also referred to as brake drums or crane brake wheels, are broad, very short cylinders attached to the rotating shaft of an electrical motor against which the brake shoes press to slow or stop the motor. Typical AISE wheel sizes are 8’, 10”, 13”, 16”, 19”, 23” and 30” diameters and are machined from ductile iron or hardened carburized steel castings.

 
DIAMETER

 

OFFSET

 

MOTOR BORE

 

DIAMETER (INCH) OFFSET MOTOR BORE FACE WIDTH "F" (INCH) HUB OFFSET "O" (INCH) HUB LENGTH "H" (INCH) BORE DIAMETER "B" (INCH) TAG # TITLE
Sort up Sort down Sort up Sort down Sort up Sort down Sort up Sort down Sort up Sort down Sort up Sort down Sort up Sort down Sort up Sort down  
8 INCH NON STANDARD     3 1/4 INCH 2 5/8 INCH 2 1/2 INCH 1 1/8 INCH 117523-000-00 8" BRAKE WHEEL (R) 
8 INCH NON STANDARD     3 1/4" INCH 2 3/4" INCH 2 1/2" INCH 1 1/8" INCH 117524-000-00 8" BRAKE WHEEL 
8 INCH NON STANDARD     3 1/4" INCH 2 3/4" INCH 2 3/4" INCH 1 1/8" INCH 117554-000-00 8" BRAKE WHEEL 
8 INCH NON STANDARD     3 1/4" INCH 2 3/8" INCH 2 3/4" INCH 1 5/8" INCH 117555-000-00 8" BRAKE WHEEL 
8 INCH NON STANDARD     3 1/4" INCH 2 9/16" INCH 2 3/4" INCH 1 5/8" INCH 117556-000-00 8" BRAKE WHEEL 
8 INCH NON STANDARD   SPECIAL 3 1/4 INCH 2 5/16/ INCH 2 13/16 INCH 1 5/8 INCH 112050-000-00 8" BRAKE WHEEL SPECIAL BORE (R) 
8 INCH STANDARD   602 3 1/4 INCH 4 INCH 3 INCH 1 3/4 INCH 112044-000-00 8" BRAKE WHEEL BORED FOR 602 MOTOR 
8 INCH STANDARD   602 3 1/4 INCH 4 INCH 3 INCH 1 3/4 INCH 120346-000-00 8" BRAKE WHEEL BORED FOR 602 MOTOR (R) 
8 INCH STANDARD   AC1 3 1/4 INCH 4 INCH 3 INCH 1 3/4 INCH 120368-000-00 8" BRAKE WHEEL (R) 
10 INCH     3 3/4" INCH 6 1/4" INCH 7 3/4" INCH 2.125" INCH 120369-000-00 10" BRAKE WHEEL 
10 INCH NON STANDARD     3 3/4" INCH 3 1/2" INCH 3 9/16" INCH 2" INCH 117552-000-00 10" BRAKE WHEEL 
10 INCH NON STANDARD     3 3/4" INCH 3 1/2" INCH 3 9/16" INCH 2" INCH 117553-000-00 10" BRAKE WHEEL 
10 INCH NON STANDARD     3 3/4" INCH 3 5/8" INCH 3 5/8" INCH 2 1/8" INCH 117525-000-00 10" BRAKE WHEEL (R) 
10 INCH NON STANDARD     3 3/4" INCH 4 1/4" INCH 6" INCH 1" PILOT BORE INCH 130005-000-00 10" BRAKE WHEEL 
10 INCH NON STANDARD   603 4.250 INCH 3.500 INCH 3.500 INCH 2.000 INCH 117624-000-00 10" BRAKE WHEEL BORED FOR 603 MOTOR (R) 
10 INCH NON STANDARD   N/A 3 3/4 INCH 4 7/8 INCH 3 15/16 INCH 2 3/8 INCH 112042-000-00 10" BRAKE WHEEL 
10 INCH NON STANDARD   N/A 3 3/4 INCH 4 7/8 INCH 4 INCH 2.370 - 1.976 INCH 112030-000-00 10" BRAKE WHEEL 
10 INCH NON STANDARD   N/A 3 3/4 INCH 4 7/8 INCH 4 INCH 2.372 - 1.976 INCH 112031-000-00 10" BRAKE WHEEL 
10 INCH NON STANDARD   PILOT 3 1/4" INCH 6 3/8" INCH 7 1/4" INCH PILOT INCH 117807-000-00 10" BRAKE WHEEL BORED FOR PILOT MOTOR 
10 INCH STANDARD     3 3/4" INCH 4 1/4" INCH 4 1/4" INCH 2" INCH 130004-000-00 10" BRAKE WHEEL 
10 INCH STANDARD   603 3 3/4" INCH 3 7/8" INCH 3 1/4" INCH 2" INCH 118007-000-00 10" BRAKE WHEEL BORED FOR 603 MOTOR 
10 INCH STANDARD   606 3 3/4 INCH 5 INCH 4 INCH 2 1/2 INCH 110709-000-00 10" BRAKE WHEEL BORED FOR 606 MOTOR 
10 INCH STANDARD   606 4 1/4 INCH 4 1/4 INCH 4 INCH 2 1/2 INCH 120367-000-00 10" BRAKE WHEEL (R) 
13 INCH     5 3/4" INCH 4 1/4" INCH 4 1/8" INCH 2 3/8" INCH 117531-000-00 13" BRAKE WHEEL (R) 
13 INCH     5 3/4" INCH 5" INCH 3 3/4" INCH 2.4725" INCH 120371-000-00 13" BRAKE WHEEL 
13 INCH     5 3/4" INCH 5" INCH 4" INCH 2 1/2" INCH 120372-000-00 13" BRAKE WHEEL 
13 INCH     5 3/4" INCH 5" INCH 4" INCH 2 1/2" INCH 120370-000-00 13" BRAKE WHEEL 
13 INCH     5 3/4" INCH 5" INCH 4" INCH 2 1/2" INCH 120373-000-00 13" BRAKE WHEEL 
13 INCH     5 3/4" INCH 5 3/8" INCH 4 1/2" INCH 3 1/4" INCH 117851-000-00 13" BRAKE WHEEL (R) 
13 INCH NON STANDARD     5 3/4" INCH 4 7/8" INCH 4 1/2" INCH 2 3/4" INCH 117527-000-00 13" BRAKE WHEEL (R) 
13 INCH NON STANDARD     5 3/4" INCH 4 7/8" INCH 4 1/2" INCH 2 3/4" INCH 117529-000-00 13" BRAKE WHEEL (R) 
13 INCH NON STANDARD     5 3/4" INCH 5" INCH 6" INCH 2 1/4" INCH 117530-000-00 13" BRAKE WHEEL (R) 
13 INCH NON STANDARD     5 3/4" INCH 5" INCH 6" INCH 2 3/4" INCH 117528-000-00 13" BRAKE WHEEL 
13 INCH NON STANDARD     5.750" INCH 5.00" INCH 4.00" INCH 2.500" INCH 118559-000-00 13" BRAKE WHEEL 
13 INCH NON STANDARD     5.750" INCH 5.00" INCH 4.00" INCH 2.500" INCH 118552-000-00 13" BRAKE WHEEL 
13 INCH NON STANDARD   606 5 3/4 INCH 3 1/2 INCH 4 INCH 2 1/2 INCH 112015-000-00 13" BRAKE WHEEL BORED FOR 606 MOTOR 
13 INCH NON STANDARD   608 5 3/4 INCH 5 INCH 4 1/2 INCH 3 INCH 112016-000-00 13" BRAKE WHEEL BORED FOR 608 MOTOR 
13 INCH NON STANDARD   616 5 3/4 INCH 5 1/4 INCH 5 1/2 INCH 4 5/8 INCH 112010-000-00 13" BRAKE WHEEL BORED FOR 616 MOTOR 
13 INCH NON STANDARD   CR41 & CR42 5 3/4" INCH 5" INCH 4 1/2' INCH 2 3/4" INCH 117551-000-00 13" BRAKE WHEEL BORED FOR CR41 AND CR42 MOTORS 
13 INCH NON STANDARD   CR41 & CR42 6" INCH 3 3/4" INCH 4 1/2' INCH 2 3/4" INCH 117547-000-00 13" BRAKE WHEEL BORED FOR CR41 AND CR42 MOTORS 
13 INCH NON STANDARD   CR41 & CR42 6" INCH 3 3/4" INCH 4 1/2' INCH 2 3/4" INCH 117549-000-00 13" BRAKE WHEEL BORED FOR CR41 AND CR42 MOTORS 
13 INCH NON STANDARD   CR41 & CR42 6" INCH 3 3/4" INCH 4 1/2' INCH 2 3/4" INCH 117548-000-00 13" BRAKE WHEEL BORED FOR CR41 AND CR42 MOTORS 
13 INCH NON STANDARD   CR41 & CR42 6" INCH 3 3/4" INCH 4 1/2' INCH 2 3/4" INCH 117550-000-00 13" BRAKE WHEEL BORED FOR CR41 AND CR42 MOTORS 
13 INCH NON STANDARD   CR41 & CR42 6" INCH 3 5/8" INCH 4 1/2" INCH 2 3/4" INCH 117526-000-00 13" BRAKE WHEEL BORED FOR CR41 AND CR42 MOTORS (R) 
13 INCH NON STANDARD   N/A 5 3/4 INCH 4 3/8 INCH 4 1/8 INCH 2 3/8 INCH 112017-000-00 13" BRAKE WHEEL 
13 INCH NON STANDARD   N/A 5 3/4 INCH 5 1/8 INCH 4 INCH 2.868 - 2.460 INCH 112035-000-00 13" BRAKE WHEEL 
13 INCH NON STANDARD   N/A 5 3/4 INCH 5 1/8 INCH 4 INCH 2.870 - 2.460 INCH 112036-000-00 13" BRAKE WHEEL 
13 INCH NON STANDARD   N/A 5 3/4 INCH 5 3/8 INCH 4 1/2 INCH 3 1/4 INCH 112012-000-00 13" BRAKE WHEEL 
13 INCH STANDARD   610 5 3/4 INCH 5 3/8 INCH 4 1/2 INCH 3 1/4 INCH 110710-000-00 13" AISE WHEEL, STANDARD OFFSET, BORED FOR 610 MOTOR (W-195) 
13 INCH STANDARD   610 5 3/4" INCH 5 3/8" INCH 4 1/2" INCH 3 1/4" INCH 130020-000-00 13" BRAKE WHEEL (R) 
14 INCH NON STANDARD     6 1/2" INCH 4 1/4" INCH 5" INCH 3 5/8" INCH 118938-000-00 14" BRAKE WHEEL 
14 INCH NON STANDARD     6 1/2" INCH 4 1/4" INCH 5" INCH 3 5/8" INCH 118936-000-00 14" BRAKE WHEEL (R) 
14 INCH NON STANDARD     6 1/2" INCH 4 1/4" INCH 5" INCH 3 5/8" INCH 118937-000-00 14" BRAKE WHEEL (R) 
16 INCH NON STANDARD     6 3/4 INCH 6 INCH 4 1/2 INCH 3 INCH 130022-000-00 16" BRAKE WHEEL (R) 
16 INCH NON STANDARD     6 3/4" INCH 4 1/2" INCH 4 1/2" INCH 3 1/4" INCH 130007-000-00 16" BRAKE WHEEL 
16 INCH NON STANDARD   610 6.750 INCH 4.500 INCH 4.500 INCH 3.250 INCH 117622-000-00 16" BRAKE WHEEL BORED FOR 610 MOTOR (R) 
16 INCH NON STANDARD   610 6.750 INCH 4.500 INCH 4.500 INCH 3.250 INCH 117621-000-00 16" BRAKE WHEEL BORED FOR 610 MOTOR (R) 
16 INCH NON STANDARD   612 7 1/4 INCH 3 9/16 INCH 5 INCH 3 5/8 INCH 112038-000-00 16" BRAKE WHEEL BORED FOR 612 MOTOR 
16 INCH STANDARD   608 6 3/4 INCH 6 1/2 INCH 4 1/2 INCH 3 INCH 120458-000-00 16" BRAKE WHEEL (R) 
16 INCH STANDARD   610 6.750 INCH 6.500 INCH 4.500 INCH 3.250 INCH 115506-000-00 16" BRAKE WHEEL BORED FOR 610 MOTOR (R) 
18 INCH NON STANDARD     7 1/4" INCH 4 3/8" INCH 5" INCH 3 1/8" INCH 119933-000-00 18" BRAKE WHEEL (R) 
18 INCH NON STANDARD     7 1/4" INCH 4 3/8" INCH 5" INCH 3 1/8" INCH 119934-000-00 18" BRAKE WHEEL (R) 
18 INCH NON STANDARD     8 1/2 INCH 5 INCH 5 INCH 4 1/8 INCH 112760-000-00 18" BRAKE WHEEL 
18 INCH STANDARD   608 8 1/2 INCH 5 INCH 4 1/2 INCH 3 INCH 115510-000-00 18" BRAKE WHEEL BORED FOR 608 MOTOR 
18 INCH STANDARD   610 8 1/2" INCH 5 1/4" INCH 4 1/2" INCH 3 1/4" INCH 117844-000-00 18" BRAKE WHEEL BORED FOR 610 MOTOR (R) 
18 INCH STANDARD   610 8 1/2" INCH 5 1/4" INCH 4 1/2" INCH 3 1/4" INCH 117846-000-00 18" BRAKE WHEEL BORED FOR 610 MOTOR (R) 
18 INCH STANDARD   610 8 1/2" INCH 5 1/4" INCH 4 1/2" INCH 3 1/4" INCH 117847-000-00 18" BRAKE WHEEL BORED FOR 610 MOTOR (R) 
18 INCH STANDARD   612/812 8.500 INCH 5.250 INCH 5.000 INCH 3.625 INCH 117310-000-00 18" BRAKE WHEEL BORED FOR 612/812 MOTOR (R) 
18 INCH STANDARD   612/812 8.500 INCH 5.250 INCH 5.000 INCH 3.625 INCH 117311-000-00 18" BRAKE WHEEL BORED FOR 612/812 MOTOR (R) 
18 INCH STANDARD   814/614 8.500 INCH 5.250 INCH 5.000 INCH 4.250 INCH 117308-000-00 18" BRAKE WHEEL BORED FOR 814/614 MOTOR (R) 
19 INCH NON STANDARD     8 3/4" INCH 7 5/8" INCH 7" INCH 3 3/4" INCH 118935-000-00 19" BRAKE WHEEL 
19 INCH NON STANDARD     8.750 INCH 6.500 INCH 4.500 INCH 3.250 INCH 119919-000-00 19" BRAKE WHEEL 
19 INCH NON STANDARD   8.75 4.56 INCH 2.84 INCH 4.56 INCH 2.84 INCH 117789-000-00 19" BRAKE WHEEL 
19 INCH STANDARD     8.750" INCH 7.500" INCH 5.000" INCH 4.250" INCH 118560-000-00 19" BRAKE WHEEL 
19 INCH STANDARD   612 8 3/4" INCH 7 1/2" INCH 5" INCH 3 5/8" INCH 117845-000-00 19" BRAKE WHEEL BORED FOR 612 MOTOR (R) 
19 INCH STANDARD   612 8 3/4" INCH 7 1/2" INCH 5" INCH 3.625 INCH 120118-000-00 19" BRAKE WHEEL BORED FOR 612 MOTOR (R) 
19 INCH STANDARD   612 8.750 INCH 7.500 INCH 5.000 INCH 3.625 INCH 120119-000-00 19" BRAKE WHEEL BORED FOR 612 MOTOR (R) 
19 INCH STANDARD   812 8 3/4 INCH 7 1/2 INCH 5 INCH 3 5/8 INCH 120408-000-00 19" BRAKE WHEEL (R) 
19 INCH STANDARD   812 8 3/4" INCH 7 1/2" INCH 5" INCH 3 5/8" INCH 130021-000-00 19" BRAKE WHEEL (R) 
21 INCH NON STANDARD     7.500" INCH 5.625" INCH 5.000" INCH 3.625" INCH 119831-000-00 21" BRAKE WHEEL (R) 
23 INCH NON STANDARD     11 1/4 INCH 8 1/4 INCH 5 1/2 INCH 5 INCH 112024-000-00 23" BRAKE WHEEL 
23 INCH NON STANDARD     11 1/4" INCH 8 1/4" INCH 5 1/2" INCH 5" INCH 115609-000-00 23" BRAKE WHEEL 
23 INCH NON STANDARD   610 1 1/4 INCH 7 7/8 INCH 4 5/8 INCH 3 1/4 INCH 112021-000-00 23" BRAKE WHEEL BORED FOR 610 MOTOR (R) 
23 INCH NON STANDARD   620 11 1/4 INCH 10 1/4 INCH 6 3/4 INCH 5 7/8 INCH 112019-000-00 23" BRAKE WHEEL BORED FOR 620 MOTOR (R) 
23 INCH STANDARD     11 1/8 INCH 8 1/4 INCH 5 1/2 INCH 4 5/8 INCH 120409-000-00 23" BRAKE WHEEL (R) 
23 INCH STANDARD   616 11.250 INCH 8.250 INCH 5.500 INCH 4.625 INCH 117785-000-00 23" BRAKE WHEEL BORED FOR 616 MOTOR (R) 
23 INCH STANDARD   616 11.250 INCH 8.250 INCH 5.500 INCH 4.625 INCH 117627-000-00 23" BRAKE WHEEL BORED FOR 616 MOTOR (R) 
26 INCH NON STANDARD   STRAIGHT 10 1/4 INCH 7 1/2 INCH 6 INCH 4 3/4 INCH 115221-000-00 26" BRAKE WHEEL STRAIGHT BORE 
26 INCH NON STANDARD   STRAIGHT 10 1/4 INCH 7 1/2 INCH 6 INCH 4 3/4 INCH 115220-000-00 26" BRAKE WHEEL STRAIGHT BORE 
30 INCH NON STANDARD     14 1/2 INCH 11 INCH 7 1/2 INCH 6 INCH 111369-100-00 30" BRAKE WHEEL 
30 INCH NON STANDARD   620 14.250 INCH 10.250 INCH 6.750 INCH 5.875 INCH 117306-000-00 30" BRAKE WHEEL BORED FOR 620 MOTOR 
30 INCH NON STANDARD   622 14.250 INCH 10.750 INCH 7.250 INCH 6.250 INCH 117309-000-00 30" BRAKE WHEEL BORED FOR 622 MOTOR (R) 
30 INCH STANDARD   618 14 1/4" INCH 10 1/4" INCH 6" INCH 5" INCH 116707-000-00 30" BRAKE WHEEL BORED FOR 618 MOTOR (R) 
30 INCH STANDARD   622 14 1/4 INCH 10 1/4 INCH 7 1/4 INCH 6 1/4 INCH 110718-000-00 30" BRAKE WHEEL BORED FOR 622 MOTOR (R) 

Copyright © 2017 Casey Equipment Corporation